TAH52 Pneumatic Air Hoist 5t – 20t
Tiger industrial air hoists are designed for, and proven in, many industries including mining, shipyards, offshore construction and power stations. They are also used for industrial and general engineering applications such as automotive plants, foundries, and heat treatment plants. The hoists operate at air pressures of between 4 and 6 bar. They comply with the requirements of ASME B30.16 and EN14492-2. Our manufacturing facility is ISO9001 certified.
- Range – 5.0 tonne to 20.0 tonne
- Reliable, fast, efficient, quiet and lightweight
- Greater than 5:1 factor of safety
- Suitable for Fleeting/Oblique pulling
- Certified for ATEX Category 3 – normal safety
Advantages of Air Hoists
Air-powered hoists are ideal for tasks that require rapid lifting speeds and constant use. These hoists are powered by a compressed air feed, making them a great alternative to electric hoists when there are no power sources available. Another key benefit of air hoists is their 100% duty cycle – significantly higher than most electric hoists. For example, an electric chain hoist that has a 25% duty cycle can be operated continuously for a maximum of 15 minutes in a one-hour period. Hoists that are powered by a compressed air feed do not have this limitation; they can remain in constant use until the job is done.
Ambient temperature range -20°C to +70°C (for temperatures outside of this range please contact us for details).
Integral differential pressure load limiting valve automatically prevents the operator lifting a load of more than 125% of the working load limit. Load limiter is 100% repeatable at all working pressures and does not wear or generate damaging heat.
Pendant control hoists are supplied with a mains emergency stop valve. This shuts off the main air supply to the hoist when activated.
Accurate and precise positioning of loads is standard for both toggle and pendant control models.
Fail Safe Disc Brake
Non-asbestos self-adjusting disc brake is applied automatically when the air supply to the hoist is shut off. The brake is self-adjusting for the life of the brake and can hold more than 125% of the working load limit.
Fleeting, Cross Hauling or Oblique Pulling
This type of application is when the load deviates from the vertical position with a force acting directly between load hook and suspension point. Our air hoists can be used for fleeting and oblique pulling operations with no de-ration of the hoist. Cross hauling can be done with a single hoist, two hoists operated independently or with two hoists operated off one dual hoist pendant control.
The exhaust air silencer is built into the hoist gearbox housing and limits the noise level to below 85dB(A).
Grade 8 load chain ensures stringent high-speed duty cycles can be met. The load chain is in accordance with the requirements of EN818-7 Appendix B.
Assisted vane lifting ensures maximum starting torque when starting under load.
The sealed planetary gearbox ensures that the most stringent duty cycles can be met. The gears are heat treated and mounted on high strength, low friction bearings.
Ease of Maintenance
The modular design of the hoist allows easy access to internal components such as the motor, gearbox, brake and load limiter. Common parts are used throughout the range.
Optional Chain Carrier
Designed to carry and hold the length of load chain required for the operation, our stainless steel chain bucket is available in different size options. These chain carriers prevent loose chain from getting snagged during lifting or lowering operations and protect any loose chain during transit to and from the operational site.
Manufactured in accordance with ATEX Directive 2014/34/EU and Machinery Directive 2006/42/EC and suitable for ATEX Category 3 – normal safety. Our products are assigned as follows: ATEX marking: : Ex II 3 GD c IIB T4 IIIB T135°C. Suitable for gas and dust hazardous areas: Zone 2 (gas) and Zone 22 (dust).
Ex II 3 GD c IIB T4 IIIB T135°C
Also available for ATEX Category 2 – high safety – please contact us for more information.
Our air hoists are supplied with either aluminium hard anodised controls which offer excellent corrosion protection or our Nickel plated SG iron option (for higher impact resistance combined with greater tensile strength and superior corrosion protection). Twist grip pendants are available as an option. Our new dual control pendant will operate two hoists with one pendant control. We also have a new remote control option available.
Aluminium Hard Anodised Pendant
Nickel Plated SG Iron Pendant
Optional Twist Grip Pendant
New Dual Hoist Pendant
New Remote Control
Weight of TAH5200 model includes 3m lift, 2m toggle control. For longer lifts add 5.7kg for the AH-050, 11.4kg for the AH-102, 17.1kg for the AH-160 and 22.8kg for the AH-200 per metre of lift. * For pendent control add 0.8kg.
Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.
Chain Slings (2)
Sling Chain (3)
YOKE Yellow Point (26)
YOKE Extreme 100 Master Links (2)
YOKE Extreme Grade 100 Lifting Chain Fittings (14)
YOKE YSB Snatch Blocks (5)
YOKE ROV Hooks & Shackles (3)
YOKE Shackles (2)
YOKE G80 Fittings (21)
YOKE Angular Contact Bearing Swivels (1)
YOKE Accessories (14)
Supra Metric Thread Bolt (1)
Supra UNC Thread Bolt (1)
Supra PPE SupraTag (1)
Supra SupraPoint (1)
Supra Chain Sling Tag (1)
Supra G8 Tag (1)
Supra G10 Tag (1)
Supra Wire Rope Sling Tag (1)
Supra Hydraulic/Chemical Hose and Pipe SupraTag (1)
Supra Industrial/Chemical Hose and Pipe SupraTag (1)
Supra SupraOne (1)