BCF Fixed Jaw Beam Clamp with Shackle

Tiger Fixed Jaw Heavy Duty Beam Clamp with Shackle.

*** Up to 90° side loading with no deration ***

Low headroom and extra wide flange options available.

These units meet and exceed all the requirements within BS EN 13155:2003+A2:2009 and AS4991.

Product no: BCF
Download Product PDF

Main Features

  • Range from 1.0t to 30.0t
  • *NEW 6.0t and 10.0t models available to suit extra wide flange beams
  • Quick and versatile rigging point for hoisting equipment
  • Shackle suspension point
  • Suitable for pulling and lifting at angles across the beam
  • Up to 90° side loading with no deration
  • 15° cross loading with no deration
  • Highly flexible – for lifting, pulling or as a semi-permanent anchor point
  • Evenly distributed loads achieved through maximum jaw surface area
  • Multidirectional adjusting screw spindle ensures a high clamping force to the various flange sizes within its capacity
  • Beam width range 75mm to 457mm
  • Operating temperature -40°C to +80°C (temperature range of -60°C to +80°C available as an option)
  • Factor of safety: 5:1 for straight pulling and lifting, 4:1 at other angles stated above
  • Optional locking device for 1t-10t (as standard on 15t-30t)

Details

Certification

Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC.

NO reduction in working load limits when side loads applied:

 

No deration up to 90° has been established for Tiger BCF model clamps and applies only for overhead beam attachments. It DOES NOT apply when used for lifting beams.

We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.

New Features:

The Tiger BCF Clamp is available with an optional rubber insert on the jaws of the clamp. This tearproof and non-slip material is ideally suited to increase the lifecycle of the clamp and protect the supporting structure from wear/damage.

Tiger clamps are also available with an optional RFID tag which provides all clamp information, certification and pre use checks online. Download the RiConnect app to have these features on your mobile phone.

 

We hold complete technical files for our products to provide full back-up and reassurance on our products’ performance and to ensure that advice for our equipment is readily available.

Due to our policy of continual product development, dimensions, weights and specifications may change without prior notice. Please check with your Tiger sales team when ordering.

Data Tables

Product Code Capacity Dimensions Net Weight (kg) Technical Drawing
A B C D E F H J K L M T
BCF-0100 1.0 75-195 206-330 105 20 195 275-230 16 21 80 84 6 5.5
BCF-0200 2.0 75-195 206-330 105 20 195 268-242 18 21 88 95 8 6.5
BCF-0300 3.0 100-350 223-488 140 25 270 364-297 22 27 110 105 10 12.0
BCF-030S 3.0 75-190 216-333 140 20 195 267-237 22 27 110 105 10 9.5
BCF-0500 5.0 100-310 223-450 140 25 288 370-320 27 27 124 111 12 14.5
BCF-050S 5.0 75-190 216-333 140 20 195 272-243 27 27 124 111 12 11.0
BCF-0600 6.0 203-457 411-691 140 42 370 486-418 27 27 124 111 12 29.9
BCF-1000 10.0 120-350 282-527 210 30 316 400-338 32 37 83 120 16 26.5
BCF-100W 10.0 203-457 415-694 210 42 370 500-430 32 37 83 120 16 44.2
BCF-1500 15.0 203-457 463-731 250 36 416 556-496 38 43.5 99 146 400 20 76.0
BCF-2000 20.0 203-457 471-768 300 50 416 603-540 45 49 126 179 408 24 100.0
BCF-3000 30.0 203-457 500-800 385 63 416 635-572 50 57 138 197 416 38 152.0

Pneumatic Hoisting

Manual Hoisting

Clamping

Winching

Height Safety

YOKE

Supra Chips/Readers

Wirop